Pitney Bowes Connect+ 500W-3000 User Manual page 188

4. Select the Concatenate Scans tab. The screen displays the available join characters.
+ (plus)
l
% (percent)
l
.
(period)
l
/ (forward slash)
l
5. Select the Home button to return to the Home screen.
Turning barcode auto-enter on/off
You can set up your Connect+ Series so that after it scans in a barcode value and displays it on the
screen, it requires the operator to press the Enter key to accept that value. You can do this if you want
to be sure that an operator verifies that the correct barcode has been scanned. By default, the system
will automatically enter the value as soon as it scans in the barcode.
To enable or disable auto-enter:
1. Select Settings under Mailing on the Home screen.
2. Select System from the list on the left side of the screen.
3. Select Scanner Settings.
4. Select the Barcode Auto-Enter tab. Select the On option button to turn on the Auto-Enter
feature; select Off turn it off.
5. Select the Home button to return to the Home screen.
Using scanner diagnostics
The Scanner Diagnostics tab allows you to verify what is actually being read by the scanner in the
barcode without having to run mail.
To determine what the scanner reads in the barcode:
1. Select Settings under Mailing on the Home screen.
2. Select System from the list on the left side of the screen.
3. Select Scanner Settings.
4. Select the Scanner Diagnostics tab.
5. Scan the barcode. The values of the scanned barcode display on the screen, for example, the
Account name, Scan type, Prefix and Value.
6. Select the Home button to return to the Home screen.
Pitney Bowes Operator Guide April 2022
System Setup
188