General Information About Settings; Setting Of Numerical Values; Setting With Given Alternatives; Quit And Enter - ESAB A2 PEK Instruction Manual

GB
Arrows
Where there is more information behind a row, this is indicated with a black arrow "
behind the text.
1.4

General information about settings

There are three types of setting:
S

Setting of numerical values

S
Setting of given alternatives
S
Setting of ON/OFF mode
1.4.1 Setting of numerical values
The settings knobs are used to increase or decrease the set values when setting
numerical values. In the measurements menu, the knobs for welding current / wire
feed speed, arc voltage or travel motion are used.
1.4.2

Setting with given alternatives

Some settings are made by selecting an option from a list.
This is an example of the list:
SAW
GMAW
GOUGING
The cursor is positioned on the row for SAW. By pressing ENTER in this position, the
SAW option is selected. If you want to choose another option instead, position the
cursor on the correct row by scrolling up or down using the positioning knob. Then
press ENTER. If you want to exit the list without making a selection, press QUIT.
1.5

QUIT and ENTER

The "soft" key farthest to the right is used primarily for QUIT, although it is
occasionally used for other functions.
S
QUIT returns you to the previous menu or image.
S
Pressing ENTER entails the execution of a selected choice in a menu or a list.
The key is called ENTER in this manual.
bi24d1ea
- 11 -
© ESAB AB 2009