Moving The Unpacked Drive Cabinet; Lifting The Cabinet With A Crane - ABB ACS880-37LC-0390A-7 Hardware Manual

Removing the transport package

Remove the transport package as follows:
56 Mechanical installation
1. Undo the screws that attach the wooden parts of the transport crate together.
2. Remove the wooden parts.

Moving the unpacked drive cabinet

￭
3. Remove the clamps with which the drive cabinet is mounted onto the transport pallet
by undoing the fastening screws.

Lifting the cabinet with a crane

4. Remove the plastic wrapping.
WARNING!
Moving the unpacked drive cabinet

Incorrect lifting can cause danger or damage. Obey the local laws and regulations
applicable to lifting, such as requirements for planning the lift, for capacity and
Lifting the cabinet with a crane
condition of lifting equipment, and for training of personnel.
Lift the drive cabinet using its lifting eyes. The lifting eyes can be removed after the cabinet
is in its final position, but their mounting holes must be blocked to retain the degree of
Lift the drive cabinet by its designated lifting points. Depending on the size of the cabinet,
protection.
it has either bolt-on lifting lugs, or lifting bars with lifting holes.
Note: The minimum allowed height of the lifting slings with IP54 units is 2 meters (6'7").
Note: The minimum allowed height of the lifting slings with IP54 units is 2 meters (6'7").
IP54