Table of Contents
Advertisement
60 Mechanical installation
Attaching the cabinet (non-marine units)
￭
Alternative 1 – Clamping
1.
Insert the clamps (included) into the twin slots along the front and rear edges of the
cabinet frame body and fasten them to the floor with a bolt. The recommended maximum
distance between the clamps in the front edge is 800 mm (31.5").
2.
If floor mounting at the back is not possible, attach the top of the cabinet to the wall
with L-brackets (not included in the delivery) bolted to the lifting eye/bar holes, and
suitable hardware.
Clamping bottom to floor
Attaching top to wall
M16
Advertisement
Table of Contents
