Moving The Cabinet On Rollers; Moving The Cabinet On Its Back - ABB ACS880-37LC-0390A-7 Hardware Manual

Moving the cabinet on rollers

WARNING!
Do not move marine versions (option +C121) on rollers.
Lay the cabinet on the rollers and move it carefully until close to its final location. Remove
the rollers by lifting the unit with a crane, forklift, pallet truck or jack.

Moving the cabinet on its back

WARNING!
Do not transport the drive with an LCL or L filter on its back. It will damage the filter.
If the cabinet needs to be laid on its back, support the cabinet from below alongside the
cubicle seams.
1 Cabinet back panel
2 Support
Mechanical installation 57
1 2
10