Moving The Unpacked Drive Cabinet; Lifting The Cabinet With A Crane - ABB ACS880 Mechanical Installation Instructions

62 Mechanical installation
Removing the transport package

12 Mechanical installation
Remove the transport package as follows:
1. Undo the screws that attach the wooden parts of the transport crate together.

Moving the unpacked drive cabinet

￭
2. Remove the wooden parts.

Lifting the cabinet with a crane

3. Remove the clamps with which the drive cabinet is mounted onto the transport pallet
by undoing the fastening screws.
WARNING!
4. Remove the plastic wrapping.
Incorrect lifting can cause danger or damage. Obey the local laws and
regulations applicable to lifting, such as requirements for planning the lift, for
Moving the unpacked drive cabinet

capacity and condition of lifting equipment, and for training of personnel.
Lifting the cabinet with a crane
Lift the drive cabinet by its designated lifting points. Depending on the size of the
Lift the drive cabinet using its lifting eyes. The lifting eyes can be removed after the cabinet
cabinet, it has either bolt-on lifting lugs, or lifting bars with lifting holes.
is in its final position, but their mounting holes must be blocked to retain the degree of
protection.
Note: The minimum allowed height of the lifting slings with IP54 units is 2 meters
(6'7").
Note: The minimum allowed height of the lifting slings with IP54 units is 2 meters (6'7").
IP54