Table of Contents
Advertisement
9.
Remove the module retaining screws at the top and the bottom of the module.
10. Pull the module carefully out onto the service platform. Keep the module secured to a
hoist or equivalent to prevent the module from falling. For information on using the lifting
device, see
Converter module lifting device for drive cabinets hardware manual
(3AXD50000210268
Reinstalling the module
1.
Push the module carefully into its bay.
2.
Fasten the retaining screws at the top and the bottom of the module.
3.
Reinstall the DC busbars at the top of the module.
4.
Reconnect the coolant pipes to the module.
[English]).
Maintenance 157
Advertisement
Table of Contents
