Fault tracing
Contents of this chapter
This chapter describes the fault tracing possibilities of the drive.
Control unit LEDs
LED
Color
BATT OK
Green
PWR OK
Green
FAULT
Red
WRITE
Yellow
Control panel and panel platform/holder LEDs
The ACS-AP-... control panel has a status LED. The control panel mounting platform or
holder has two status LEDs. For their indications, see the following table.
Indication
Battery voltage of the real-time clock is OK (higher than 2.8 V).
When the LED is not lit,
• battery voltage is below 2.8 V,
• the battery is missing, or
• the control unit is not powered.
Internal voltage OK
The control program indicates that the equipment is faulty. See
the appropriate firmware manual.
Writing to SD card in progress.
Fault tracing 141
10