Table of Contents
Advertisement
Power supply 42v (LS200-48)
This PSU supplies 42v to the stepper motor.
LS200-48
Power supply
Set power supply output voltage
to 42v
HI, MI, WI-700 service manual - 2 - component parts
The input voltage to this power supply is 100-240vAC and this
voltage is obtained from the labeller mains terminal
connection inside the main electrical cabinet.
The output is:
Voltage = 42v +/- 0.3v
Power - output wattage = 200w
Rated current = 4.2A
NOTE: The standard manufactures output voltage for this
power supply is 48V.
The power supply is reset to 42V for this labeller
application therefore the adjustment trimmer should not
be adjusted. This is pre-set to the correct output voltage
for the labeller
2-48
To PL11 on labeller
board
+42v to pins 9 & 10
0v to pins 7 & 8
Mains power from
electrical cabinet
Issue 9 04/2020
Advertisement
Table of Contents
