Outfeed Conveyor When Base Labeller Is Fitted - Digi 700 Series Service Manual

Outfeed conveyor when base labeller is fitted

The outfeed conveyor (first long outfeed) connects to the machine frame in a different way to the other
conveyors and therefore the way it can be removed differs.
HI, MI, WI-700 service manual - 2 - component parts
To remove the outfeed conveyor, lift the metal
catch on each side of one end the conveyor.
The conveyor can now be lifted from its mount-
ing position.
The conveyor belt is not easily removed (without tools) from its
deck.
To replace the conveyor, locates the conveyor onto the pins
on the frame at the opposite end to the two catches. Lower the
catch end down and return the two catches to the locked
position.
2-30 Issue 9 04/2020