Base Labeller Belt Applicator - Digi 700 Series Service Manual

Base Labeller - Base labeller belt applicator
The belt applicator in the base labeller has four transport belts which are rotated by a small DC motor within
the assembly of the applicator.
The suction of air to hold the label onto the belts is made by four 24v DC fans within the assembly of the
applicator.
To carry out any maintenance on the belt applicator assembly, the complete assembly needs to be
removed from the machine.
HI, MI, WI-700 service manual - 4 –servicing
To remove the belt applicator assembly from the
machine, unplug the round black connector (motor
cable) and the smaller black connector with blue band
from electrical box in the base labeller cabinet.
4-86 Issue 9 04/2020