Labeller Position Adjustment; Touch Applicator Transport Packaging - Digi 700 Series Service Manual

Labeller position adjustment

Ensure that the labeller is positioned such that packs can pass underneath it, with sufficient clearance for
labels to be applied. Press the up / down power lift buttons on the front of the electrical cabinet to move the
labeller height up or down.
For labeller back/forward position & rotation, loosen the locking handle on the top and/or the side of the
horizontal bar, slide the bar forwards or backwards or hold the labeller and rotate to its desired position.
Tighten locking handle
Touch applicator transport packaging - classic labeller
If a classic labeller is fitted
to the machine with a
touch applicator, remove
the applicator outer cover
(3 screws) & remove the
transport packaging from
the touch applicator
assembly
1-18
HI, MI, WI 700 service manual - 1 - Installation
Issue 9 04/2020