Table of Contents
Advertisement
Note: based on a 16-hour day. Daily & yearly checks to be carried out regardless of actual running time.
Weekly, monthly & 3 monthly intervals may be adjusted to suit actual machine running time.
MACHINE AREA /
COMPONENT
DAILY
BASE LABEL
APPLICATOR
ADDITIONAL
OUTFEED DRIVE
LABEL
TRANSPORT
BELTS
TRANSPORT BELT
ROLLERS
BLOW BARS
GUIDE ROLLERS
(black rollers at con-
veyor top)
TRANSPORT BELT
DRIVE
700 SERIES MACHINE ROUTINE MAINTENANCE SCHEDULE
FREQUENCY OF TASK
3
WEEKLY
MONTHLY MONTHLY
YEARLY
HI, MI, WI-700 service manual - 6 – maintenance schedule
Check condition of nylon gear. Also check it is free running when conveyors are not
engaged onto it. (Refer to parts manual for parts detail).
Check condition and tension of belts
Check for wear or any tightness on bearings and roller assemblies (refer to 700
parts manual for parts detail)
Check all blow bar holes are clear of debris, tight in their mountings and facing in
the correct direction.
Check all rollers are clean and run freely on their shaft (refer to 700 parts manual for
parts detail)
Check smooth rotation of DC motor
6-8
DETAILS OF TASK
Issue 9 04/2020
Advertisement
Table of Contents
