Table of Contents
Advertisement
Note: based on a 16-hour day. Daily & yearly checks to be carried out regardless of actual running time.
Weekly, monthly & 3 monthly intervals may be adjusted to suit actual machine running time.
MACHINE AREA /
COMPONENT
DAILY
LABELLER
LIFTING GEAR
LEAD SCREW /
BEARINGS / BUSH-
ES
TOUCH SCREEN
CLEAN
CALIBRATION
AIR REGULATOR
DRAIN AND BOWL
CLEAN
PACK SENSORS
REFLECTOR
WENGLOR PHO-
TOELECTRONIC
SENSORS OR
FIBRE OPTIC
SENSOR
700 SERIES MACHINE ROUTINE MAINTENANCE SCHEDULE
FREQUENCY OF TASK
3
WEEKLY
MONTHLY MONTHLY
YEARLY
HI, MI, WI-700 service manual - 6 – maintenance schedule
Remove lifting gear cover to check condition of lead screw and bearings.
Clean and lubricate with grease.
Check micro switches for travel limit are working. (Refer to parts manual for detail)
Clean touch screen, use appropriate cleaning solution for screen surface.
Check the accuracy of touch points. Re-calibrate if required.
Check auto drain, clean bowl (warning – ensure bowl is cleaned with a suitable
cleaner that will not attack the polycarbonate bowl).
The cleaning / changing of filter interval is dependent on how clean the air supply is
to the regulator.
Clean reflector. Check for water ingress to reflector
Check for any damage. Check sensitivity of sensor is correct for customers pack
and sensor is mounted securely. (Refer to 700 service manual, component parts
section, pack sensor amps)
6-9
DETAILS OF TASK
Issue 9 04/2020
Advertisement
Table of Contents
