Table of Contents
Advertisement
Note: based on a 16-hour day. Daily & yearly checks to be carried out regardless of actual running time.
Weekly, monthly & 3 monthly intervals may be adjusted to suit actual machine running time.
MACHINE AREA /
COMPONENT
DAILY
SCALE
WEIGHT CHECK
SCALE
CALIBRATION
LOAD CELL
LIMIT STOPS
SCALE
ALIGNMENT
* NOTE: This operation to be undertaken by the distributor or other qualified persons using traceable calibrated weights.
700 SERIES MACHINE ROUTINE MAINTENANCE SCHEDULE
FREQUENCY OF TASK
3
WEEKLY
MONTHLY MONTHLY
YEARLY
Production on-line weight check
Full scale calibration check – carry out complete weight check on scale.
NOTE BELOW
(Refer to service manual, servicing section)
Check for debris on / around load cell area, clean. Re-zero if required.
Check mounting bolts are tight.
Check there is no debris between stop and scale frame, check limit stop distance is
set correctly. (Refer parts manual for scale base detail)
Check scale is secure and there is no movement in scale feet.
Check the scale frame / conveyor is not touching any other framework or infeed
conveyor.
6-4
HI, MI, WI-700 service manual - 6 – maintenance schedule
DETAILS OF TASK
*SEE
Issue 9 04/2020
Advertisement
Table of Contents
