Load Cell - Digi 700 Series Service Manual

Load cell

The load cell fitted to the scale unit can be either a 15kg or 30kg depending on the specification required for
the scale. NOTE: these capacities are not the machine/scales capacity. Typically this will be a machine
capacity of 6kg for the 15kg load cell and a machine capacity of 12kg for the 30kg load cell.
Transit screw and corner
overload stops.
Refer to section 1 -
Installation for setting of
these.
HI, MI, WI-700 service manual - 2 - component parts
The load cell is supplied with a cable gland, fixing
plate and connecting plug fitted to the cable. This
assembly aids replacing this component if required.
Refer to section 4 - servicing for details of replacing
the load cell
With the scale conveyor removed, the scale deck can
be seen.
The load cell sits under the scale deck
2-32 Issue 9 04/2020