Table of Contents
Advertisement
Infeed conveyor speed control
As default the infeed, scale and outfeed conveyors will run at the same speed (the speed the machine is
set for selected plu or set on operation screen).
Depending on the spacing between packs on entering the infeed, it may be necessary to reduce the speed
of the infeed conveyor compared to the scale and outfeed.
By doing this, a larger gap is made between packs at the infeed / scale position.
To slow the infeed conveyor, locate the potentiometer in the cabinet and turn it anti-clockwise.
HI, MI, WI-700 service manual - 2 - component parts
Location of infeed conveyor
speed reduction potentiometer.
If a sub-infeed is fitted, a 2
is fitted to independently control this
conveyor
2-23
nd
potentiometer
Issue 9 04/2020
Advertisement
Table of Contents
