Table of Contents
Advertisement
SATEL
2. Enter the new keypad address and tap
will be displayed.
If you fail to set the new address within 2 minutes after you started the "Keypads addr."
function, the function will be terminated automatically and the keypad will restart.
Keypad in the VERSA system
Starting the service mode in the VERSA system
1. Tap the keypad screen. The user screen will be displayed.
2. Swipe the screen up. The on-screen keypad will be displayed (Fig. 8).
INT-TSH2
Fig. 7. Address setting.
. The keypad will restart. The service menu
Fig. 8. On-screen keypad.
9
Advertisement
Table of Contents
Need help?
Do you have a question about the INT-TSH2 and is the answer not in the manual?