Satel INT-TSH2 Installer Manual page 18

16
Signal entry delay of partitions [Sign.entry del.] – the keypad audibly signals the entry
delay countdown in selected partitions.
Signal exit delay of partitions [Sign.exit delay] – the keypad audibly signals the exit delay
countdown in selected partitions.
Alarm messages
Partitions [Part.al.msg.] – if this option is enabled, messages on partition alarms are
displayed (they contain the name of partition).
Zones [Zone al.msg.] – if this option is enabled, messages on alarms from zones are
displayed (they contain the name of zone). The zone alarm messages have the priority.
Alarms
FIRE [Fire alarm] – if this option is enabled, the user can trigger a fire alarm from the keypad
by using a widget.
PANIC [Panic alarm] – if this option is enabled, the user can trigger a panic alarm from the
keypad by using a widget or by tapping the screen and holding for 3 seconds when the
screensaver or the slideshow is displayed.
AUX. [Medical alarm] – if this option is enabled, the user can trigger a medical alarm from the
keypad by using a widget.
3 wrong codes [3 wrong codes] – if this option is enabled, entering incorrect code three
times will trigger the alarm.
Additional options
Silent PANIC alarm [Silent panic] – if this option is enabled, the panic alarm triggered from
the keypad will be a silent one, i.e. the keypad will not indicate it, there will be no audible
signal, but the alarm will be reported to the monitoring station. The silent panic alarm is
useful when the control panel is sending events to the monitoring station, but unauthorized
persons should not be aware of the alarm being triggered. This option is available when
the PANIC option is enabled.
Sign. alarms [Alarm signal.] – if this option is enabled, the keypad will signal alarms audibly.
Keys sound [Key sound] – if this option is enabled, tapping the screen is confirmed by
a sound.
Sign. trbl. in part. arm [Trbl.in p.arm.] – if this option is enabled, the trouble information on
the status bar will be hidden after all partitions managed by the keypad are armed (if this
option is disabled, the trouble information on the status bar will be hidden after just one of
the partitions is armed).
Sign. new trouble [New trbl. sign.] – if this option is enabled, the keypad will audibly signal
the occurrence of a new trouble (if the "Trouble memory until review" option is enabled).
New trouble signaling is cleared after the troubles have been reviewed by the user.
Show code entering [Show code ent.] – if this option is enabled, entering the code is
presented on the keypad screen by asterisks.
Exit delay clearing enable [Fin.exit delay] – if this option is enabled, the user can shorten
the exit delay time by using a widget or a function. The exit delay time can be shortened in
partitions with the "Exit delay clearing" option enabled, when the countdown is running.
Auto-Arm delay countdown [Auto-arm delay] – if this option is enabled, the keypad informs
the users about the auto-arm delay countdown in partition (message / sound).
Show disarm messages [Show disarming] – if this option is enabled, the keypad displays
the disarming message irrespective of how the system has been disarmed. If this option is
disabled, the keypad displays the disarming message only when the system has been
disarmed from this keypad.
INT-TSH2 SATEL