Product overview
4.1.4
LED displays
Depending on the module, the modules have various LED displays for visualising status and diagnos-
tics.
Detailed information on the LED displays of the individual modules è Product-specific documentation
4.1.5
Labelling elements
Fig. 12: Inscription label
The same clip-on inscription label is available for all modules. The inscription label is in two parts and
can be divided into two smaller units if necessary.
4.2
Function
The automation system is connected to a higher-level controller via an interface. The behaviour of
the automation system can be adapted to the various requirements by access to internal parameters.
Various diagnostics functions such as open load and channel diagnostics are also available.
14
Festo — CPX-AP-A — 2022-07