Operation; Led Status Indication - Festo CPX-F8DE-P Manual

Operation

No. Module
4 MPA: pneumatic interface
5 MPA: pneumatic module
VMPA1-FB-EMG-8 [8DO]
6 MPA: pneumatic module
VMPA2-FB-EMG-4 [4DO]
Tab. 30: Input and output addresses for the example è Fig. 33
5 Operation
5.1

LED status indication

Fig. 34: LED display of the input module CPX-F8DE-P
The following LEDs are on in the normal operating status:
– FP-LED 2
– Status LEDs 4 of the active input channels
The status LEDs on inactive input channels and the module error LEDs 1 and channel error LEDs 3
do not light.
NOTICE
The designations of the LEDs correspond to the physical contacts E0 to E7.
• Note the special position of the input signals in the input image of the CPX-F8DE-P è 2.2.3 Bit
pattern of the output and input data (F-user data).
Detailed information on error characteristics can be found in
è 6.3.1 Behaviour in response to original module errors.
Festo — CPX-F8DE-P — 2022-10d
I address O address
- -
- 15
- 16
69