WORKSHOP MANUAL
5. Refit the filter cap (1).
Only for Park 4WD:
Screw the two drain plugs (2) and (3) back on,
taking care to always replace the plugs (2) and
(3) if the seals are damaged.
6. Restore the oil level using the quick coupling.
[
8.3.2]
8.3.2 System emptying and filling
NOTEDraining the oil is facilitated if it is carried
out before it cools down completely.
NOTE The oil must be drained with the by-pass
open.
1. Unscrew the cap (1) of the oil tank (2).
2. Place a container under the rear transmission
unit and drain all the oil by unscrewing the filter
cap (3).
Only for Park 4WD:
Unscrew the two drain plugs (4) and (5).
3. Let all the oil flow into the container.
PARK
Chapter
8 - HYDRAULIC SYSTEM
1
3
1
2
3
5
EDITION
PAGE
2020
95 /
124
1
2
4