Fault Notification; Spare Parts Requests - Stiga 2021 Edition PARK 320 P Workshop Manual

WORKSHOP MANUAL

1.3.4 Fault notification

The Manufacturer welcomes any notifications of faults that recur with particular frequency. It gives
the opportunity for a careful inspection of the problem and the implementation of corrective action
at production level.
Similarly, the Manufacturer will report any faults discovered on the machines produced, with rec-
ommendations for the most suitable procedures for their remedy.

1.3.5 Spare parts requests

When requesting spare parts, the code number must be given, referring to the exploded charts for
the year of manufacture, shown on the product identification label.
PARK
Chapter
1 - INTRODUCTION
EDITION PAGE
2021 7 /
124