Stiga 2021 Edition PARK 320 P Workshop Manual page 76

WORKSHOP MANUAL
PARK
When assembling, perform the steps described above in reverse order, taking care to:
– replace all the seals of the hydraulic fit-
tings;
– tighten the nuts (18) to a torque of 20-25
Nm.
– tighten the nuts (20) to a torque of 35-50
Nm.
– tighten the hydraulic fittings to the torque
indicated in the "Hydraulic connections
diagram" [ 8.1.3]
After the assembly,
– fill the oil [ 8.3.2].
– adjust the pedal stroke
7 - WHEELS - TRANSMISSION - BRAKE
[ 7.5.2].
Chapter
18 18
EDITION PAGE
2020 76 /
124
20