WORKSHOP MANUAL
PARK
2. Unscrew the nut (2) and remove the lever
(3) on which the tightener (4) is fixed.
When assembling, perform the steps de-
scribed above in reverse order.
▶▶ Park 2WD machines:
1. Remove the belt between the engine and
the axle of the articulated joint.
from 1 to 3.
2. Unscrew the central screw (1) that secures
the double pulley (2).
3. Remove the double pulley (2), the spacer (3)
and the arm (4) with the tightener (5).
When assembling, perform the steps de-
scribed above in reverse order.
Tighten the screw (1) to a torque of 35-50 Nm.
Chapter
6 - TRANSMISSION BELTS
[
6.3.2]
2
EDITION
2020
3
2
1
2
4
3
PAGE
65 /
124
4
5