Stiga 2021 Edition PARK 320 P Workshop Manual page 47

WORKSHOP MANUAL
PARK
8. Unscrew the screw of the eyelet fitting (13),
appropriately collecting the oil still present in
the pipes.
9. Remove the steering valve (14) together with
the steering column (15) and the pinion (16).
15
10. If it is necessary to separate the steering
valve (14) from the steering column (15), ex-
tract the two elastic pins (17) with the help of
a pin punch.
When assembling, perform the steps described above in reverse order, taking care to:
– restore the adjusters (9) and
(10) and the correct tension
of the chain (11). [
– check the centering of the
central link of the chain (11)
with respect to the steering
pinion [ 4.2.1]
– always replace the sealing washers (18) and
(19);
– tighten the fitting (12) to 30-37 Nm and the
screw (13) to 35-42 Nm, to avoid oil leaks or
damages to the components.
– Check the oil level in the tank .
14
16
10
4.2.1]
10
[ 8.1.3]
Chapter
4 - STEERING
14
15
17
17
12 18
EDITION
2020
13
14
9
11
19
PAGE
47 /
124
13