Stiga 2021 Edition PARK 320 P Workshop Manual page 21

WORKSHOP MANUAL
PARK
a) Checking pictograms and safety labels
These labels are considered an integral part of the safety devices. Always replace unread-
able labels and restore missing ones, according to the figure shown here.
b) Checking safety devices intervention
The safety systems intervene according to two basic criteria:
– to prevent ignition if ALL safety conditions are not met;
– to stop the machine operation if ONE or MORE condition are not met.
The table shows some typical situations.
Situation
• Operator seated.
• Parking brake engaged.
• Power Take-Off deactivated
• Machine switched on or in motion.
• Operator not seated.
• Parking brake engaged.
• Operator seated.
• Parking brake not engaged.
• Machine on.
• Power Take-Off activated.
• Machine on.
2 - INFORMATION FOR SERVICE CENTRES
Action
Rotate the key in the start
position.
The operator gets up from
the seat.
Try turning on the machine
Try turning on the machine The machine is not starting.
The operator gets up from
the seat.
Move the mechanical lifting
pedal to the transport posi-
tion.
Drive the machine forwards
and backwards and release
the drive pedal.
Chapter
The machine is turned on
The machine stops
The machine is NOT start-
ing.
Power Take-Off is
deactivated.
Power Take-Off is deacti-
vated.
The machine must slow
down to a standstill within
1.90 metres.
EDITION PAGE
2020 21 /
124
Result