General Information; Machine Identification - Stiga 2021 Edition PARK 320 P Workshop Manual

WORKSHOP MANUAL
2 - INFORMATION FOR SERVICE CENTRES
Summary
2.1 GENERAL INFORMATION .................................................................8
2.1.1
2.1.2
2.1.3
2.1.4
2.2 MACHINE PREPARATION AND DELIVERY.......................................9
2.2.1
2.2.2
2.2.3
2.2.4
2.2.5
2.3 TRANSPORTATION AND HANDLING ...............................................12
2.3.1
2.3.2
2.4 SPARE PARTS ....................................................................................14
2.4.1
2.4.2
2.5 MAINTENANCE ..................................................................................15
2.5.1
2.5.2
2.5.3
2.5.4
2.5.5
2.5.6
2.5.7
2.6 TECHNICAL SPECIFICATIONS AND DIMENSIONS .........................24
2.6.1
2.6.2

2.1.1 Machine identification

Each machine has a label (1) which shows the
technical specifications , the model (1a) and the
serial number (1b).
The model and serial number must be shown
when requests are made under Warranty, and are
indispensable for spare part orders.
1a
Type:
#######
1b
######
Ride on mower with front deck
Art. N.
##
PARK 2 - INFORMATION FOR SERVICE CENTRES
Machine identification ...................................................................8
Engine identification .....................................................................9
Transmission Unit identification ....................................................9
Versions and equipment ...............................................................9
Preliminary procedures .................................................................9
Tyre pressure check......................................................................10
Battery ..........................................................................................10
Axial steering allowance adjustment ............................................11
Final operations ............................................................................11
Machine transportation .................................................................12
Machine lifting ..............................................................................12
Original spare parts ......................................................................14
Non-original spare parts ...............................................................14
Criteria for maintenance ...............................................................15
Safety measures to be adopted ....................................................15
Tightening torque settings ............................................................15
Routine maintenance schedule ....................................................17
Lubrication ....................................................................................20
Safety devices check ....................................................................20
General checks ............................................................................22
Technical specifications ................................................................24
Overall dimensions .......................................................................26

2.1 GENERAL INFORMATION

STIGA S.p.A.
Via del Lavoro, 6 - 31033
Castelfranco V.to (TV) - Italy
#############
######
kW - ###### /min
######
kg
######
######
######
################## - PARK ########
/ #### - s/n ################## Made in Italy
Chapter
1
EDITION PAGE
2020 8 /
124