WORKSHOP MANUAL
PARK
a) Front part lifting
WARNING!
Engage the parking brake and place two wedges behind the rear wheels
to prevent the machine from moving.
▶▶ Park 4WD machines:
– Stabilize the machine with
two stands placed in corre-
spondence of load-bearing
elements of the front part of
the frame.
▶▶ Park 2WD machines:
– Place a wooden beam under the two lower
brackets of the frame, and where the axis of
the front wheels are
– Lift the machine using a jack that acts in the
centre of the beam.
2 - INFORMATION FOR SERVICE CENTRES
– Raise the machine using a jack that acts under the front transmis-
sion assembly.
Chapter
– Stabilize the machine with two stands
placed in correspondence of load-bearing
elements of the front part of the frame.
EDITION
PAGE
2020
13 /
124