Fuel Tank; Removal And Replacement Of The Tank - Stiga 2021 Edition PARK 320 P Workshop Manual

WORKSHOP MANUAL

5.2.1 Removal and replacement of the tank

1. Remove the rear hood
WARNING!
machine. Do not smoke near the tank and whenever you handle petrol.
1. Unscrew the cap (1) and remove the petrol
collecting tray (2), releasing the underlying
tab (3) with the help of a screwdriver. Screw
the cap (1) back on to prevent dirt
from entering the tank or acciden-
tal spills of petrol.
2. Close the tap (4).
3. Prepare a container and remove the clamp
(5) with the help of a screwdriver and pour the
petrol in the tube (6) into the container.
IMPORTANT The clamp (5) is of the "CLIC"
type as it meets the safety criteria required for
this application. Therefore, in case of replace-
ment, it is necessary to use an original spare
part and NOT a common screw clamp.
5
4. Unscrew the wing nut (7), remove the arch (8)
and remove the tank (9).
PARK
[ 3.1.1]
All operations concerning the tank must be carried out with the cold
5
Chapter
5 - ENGINE AND FUEL TANK

5.2 FUEL TANK

3
9
2 1
6
4 5
EDITION PAGE
2020 56 /
124
8 7