Removal Of The Front Transmission Unit - Stiga 2021 Edition PARK 320 P Workshop Manual

WORKSHOP MANUAL

7.3.2 Removal of the front transmission unit

1. Lift the front part and stabilize the machine
[ 2.3.2].
2. Remove the front wheels
4.
3. Place a container under the rear transmission
unit and drain all the oil by unscrewing the filter
cap (1).
Only for Park 4WD:
Unscrew the two drain plugs (2) and (3).
4. Place a container under the front transmission
unit and drain all the oil by unscrewing the two
caps (4) and (5).
5. Disconnect all mechanical connections:
– release the terminal (6) of the brake cable;
– release the spring (7) of the PTO engage-
ment tightener;
– unscrew the nut (8) and remove the support
(9) of the by-pass control rod (10).
PARK 7 - WHEELS - TRANSMISSION - BRAKE
[ 7.1.2]
7 8
9
Chapter
from 1 to
3
10
1
2
5
6
EDITION PAGE
2020 74 /
124
2
1
4