Stiga 2021 Edition PARK 320 P Workshop Manual page 99

WORKSHOP MANUAL
PARK
2. Keeping the nut (4) still, turn the screw (5) until
the desired gap is obtained under the slide (6)
measured with a feeler gauge.
3. Screw the internal valve (2) back into the valve
body (1) until the end.
When assembling, tighten the hydraulic fittings to the torque indicated in the "Hydraulic connec-
tions diagram" [ 8.1.3]
Chapter
8 - HYDRAULIC SYSTEM
6
2
EDITION PAGE
2020 99 /
5
2
124
4