Stiga 2021 Edition PARK 320 P Workshop Manual page 115

WORKSHOP MANUAL
PARK
4. Move the dashboard casing (3) to access
both screws (4) of the front of the crossbar
(2).
5. Unscrew the two screws (4) located on the
front part
6. Remove the support bracket (5) of the re-
lays (6).
NOTE The relays (6) can be two or three, de-
pending on the type of engine.
▶▶ Park 3xx :
1. Remove the two covers under the seat.
[ 3.1.5]
2. Extract the relays (1) located inside the cov-
ers (2).
NOTE The relays (6) can be two or three, de-
pending on the type of engine.
IMPORTANT The relays are all the same, regardless of their function; in case of removal, suitably
mark the cables and their position on the relay contacts to avoid connection errors and operating
anomalies.
IMPORTANTE Before replacing a relay, investigate the causes of the failure in order to prevent
the fault to recur again.
Chapter
9 - ELECTRICAL SYSTEM
3
5
EDITION
2020
4 4
6
6 6
PAGE
115 /
124
2
6
5