Service Centre Procedures; Interventions Under Warranty; Exceptions To The Use Of The Warranty; Service Repairs Outside Warranty - Stiga 2021 Edition PARK 320 P Workshop Manual

WORKSHOP MANUAL
- test the engine in a well-ventilated environment or where there are adequate exhaust fume ex-
traction systems;
- do not pollute the environment with oil, petrol or other waste which has a strong impact on the
environment. Dispose of all waste in accordance with the laws in force;
- ensure that other persons cannot accidentally carry out actions that may physically endanger
those working on the machine.

1.3.1 Interventions under Warranty

The Manufacturer acknowledges the interventions performed under warranty as per the terms,
procedures and limits stated in the contract.
As far as the engine and the transmission unit are concerned, the conditions provided by their
respective Manufacturers apply.

1.3.2 Exceptions to the use of the Warranty

• The warranty does not cover damages caused by:
- Lack of knowledge and familiarisation of the accompanying documentation on the part of the
user.
- Carelessness.
- Incorrect or prohibited use or assembly.
- Use of non-genuine spare parts.
- Use of accessories not supplied or approved by the manufacturer.
• Furthermore, the warranty does not apply to:
- Components subject to wear such as belts, wheels, batteries and cables.
- Normal wear and tear due to use.
- Engine and transmission. These components are covered by the warranties of the respective
manufacturers, with terms and conditions specified separately.
The purchaser is covered by national legislation of the Country he resides in. The legal rights of
the laws that refer to the purchaser are not limited by this product warranty.

1.3.3 Service repairs outside warranty

The Service Centre has to make out a report containing the machine serial number, a summary
of the problems, the repairs carried out and any spare parts used for each repair done on the ma-
chine.
A copy of these reports must be retained and made available to the Manufacturer together with
the replaced parts in case of any subsequent disputes with Customers.
PARK

1.3 SERVICE CENTRE PROCEDURES

Chapter
1 - INTRODUCTION
EDITION PAGE
2021 6 /
124