Stiga 2021 Edition PARK 320 P Workshop Manual page 63

WORKSHOP MANUAL
PARK
4. Unscrew the central screw (4) to remove the
arm (5) of the tightener (6) together with the
spring (1) and the protective casing (7).
5. Remove the double pulley (8) together with
the belt (9).
When assembling, perform the steps described
above in reverse order, taking care to:
– reassemble the spacer (10) with the stop facing
upwards and to observe the
correct assembly sequence
10
indicated in the exploded view
drawing and described in de-
tail in chapter 3.
– tighten the screw (4) to a
4
6 - TRANSMISSION BELTS
[ 3.2.1]
torque of 35-50 Nm.
10
Chapter
12
4
1
13
9
EDITION PAGE
2020 63 /
124
5
7
6
5 7
7
8