Table of Contents
Advertisement
Appendix
MI6100-0009
System Type
Water Monitoring System
Task:
Pressure Reduction Valve Function Test
Task
This instruction identifies the location and how to test the pressure reduction
valve (DMV755). The test must be carried out by a trained technician.
description:
Difficulty 1-5
Overhaul Interval
Every 6 month
Spare Parts
Part no:
Description:
02703
Pressure Reduction Valve
Instructions
Steps
1.Remove protective black plastic cap. (A)
2.Unscrew locking nut. (B)
3.The function test is done by adjusting the
pressure to achieve the normal working
pressure. This is done by turning the
pressure adjusting screw clockwise to lower
the pressure and anticlockwise to increase
the pressure. (B)
4.If the valve is not working properly, the
valve must be replaced.
Notes:
Estimated Time Consumption
2 min
Tools
Qty.
Item:
1 x 13mm Spanner
Photos:
MI6100-0009
Page 98 of 110
Advertisement
Table of Contents
