Maritime G6100 Operation Manual page 89

Water Monitoring System
Part
Part Description
No.
• 1 x Electrode for pH Sensor
• 1 x Gasket for pH Sensor
• 2 x O-ring PAH Chamber
• 1 x Turbidity O-ring
Recommended Spare Parts Kit for WM
and WMR for 1-year operation
• 1 x Wiper Blade (set of 4 pcs.)
• 1 x Electrode for pH Sensor
02958
• 1 x Gasket for pH Sensor
• 2 x O-ring PAH Chamber
• 1 x Turbidity O-ring
Recommended Spare Parts Kit for WM30
Type A for 1-year operation
• 1 x Pump Impeller
• 1 x Shaft Seal
• 1 x End Cover
02959
• 1 x O-Ring For End Cover
• 1 x Shaft V-Ring
• 1 x Electrode for pH Sensor
• 1 x Gasket for pH Sensor
Recommended Spare Parts Kit for WM30
Type B for 1-year operation
• 1 x Impeller for pump NBR Ø 55 mm
• 1 x Mechanical seal
• 1 x Wear plate without hole
• 1 x Wear plate with punched hole st.s
03964
• 3 x O-Ring for impeller pump
• 1 x Tape
• 1 x Shaft Key
• 1 x Sandpaper
• 1 x Electrode for pH Sensor
• 1 x Gasket for pH Sensor
Ver.5.0 – Revision March 2022
The specific appearance of the spare parts is
subject change without notice; the function
however will not change
Page 89 of 110