Maritime G6100 Operation Manual page 13

Water Monitoring System
Connections
Electrical Connections
Sample Temperature
Sample Purity
Sample Condition
Pump Lifting Height
Type A
Type B
Inlet Suction Pressure
Dimensions & Weight
Wetted Materials
Enclosure Material
Hose Pump Cabinet – WMPH
Equipment
Connections
Electrical Connections
Sample Temperature
Sample Purity
Sample Condition
Pump Lifting Height
Inlet Suction Pressure
Dimensions & Weight
Wetted Materials
Enclosure Material
Turbidity Pressure Reduction Cabinet – WMRTU
Equipment
Ver.5.0 – Revision March 2022
Refer to the PI diagram & the Installation Layout
Refer to the Electrical Drawings
0...50
o
C
Particle size of max. 2 mm
Avoid air and particles in the sampling system
Lifetime reduces if pressure is above recommendation.
Recommendation: 0.8...1.5 bar (g)
Recommendation: 0.8...2.2 bar (g). Do not exceed 3 bar
Ensure positive suction pressure (0.1...0.8 bar (g))
Refer to the Installation Layout
AISI 316, Acetal, PTFE, PVDF, PMMA.
Impeller materials: NBR (other materials upon request)
AISI 304 Painted or Polycarbonate
20 mesh strainer, Flow Regulating Valve, External Hose
pump, Debubbler, and Manometer
Refer to the PI diagram & the Installation Layout
Refer to the Electrical Drawings
0...50°C
Particle size of max. 2 mm
Avoid air and particles in the sampling system
Note: lifetime reduces if pressure is above
recommendation
Recommendation: 0.8...2 bar (g). Do not exceed 3 bar
Ensure positive suction pressure (0.1...0.8 bar (g))
Refer to the Installation Layout
AISI 316, Acetal, PTFE, PVDF, PC, NBR-Nitrile
AISI 304 Painted or Polycarbonate
20 mesh Strainer, Pressure Reducing Valve, Pressure
holding valve /Relief valve, ON/OFF Valve, Flow
Page 13 of 110