Table of Contents
Advertisement
Appendix
MI6100-0011
System Type
Water Monitoring System
Task:
Pump Impeller & End Cover Replacement (TYPE A)
Task
This instruction identifies the location and replacement of the Pump
Impeller & End Cover. This replacement must be carried out by a trained
description:
technician.
Difficulty 1-5
Overhaul Interval
Every 6 month
Spare Parts
Part no:
Description:
03409
Pump Spare Parts Kit
Instructions
Steps
1. Unscrew the end cover. (A)
2. Remove old impeller and O-ring without
damaging the pump housing. (B)
3. Insert new impeller while rotating it
clockwise so that the impeller is properly
mounted as shown on the photos. (C)
4. Insert new O-ring & refit the end cover.
Notes:
Estimated Time Consumption
15 min
Tools
Qty.
Item:
1
Flat-headed screwdriver
Photos:
MI6100-0011
Page 100 of 110
Advertisement
Table of Contents
