Logging; Ip Address Configuration; Figure 4-16: Logging Page For Exporting The Logged Data; Figure 4-17: System Info Page - Maritime G6100 Operation Manual

Menu Structure

4.2.4 Logging

Note
This logging function cannot substitute the data recording and processing device
according to IMO regulations MEPC 259(68).
The HMI must be equipped with an SD-card if the system is intended to handle logging. It
is not allowed to remove the SD-card since the signals are being saved automatically to the
SD-card. By entering the Logging page, the user can gain access to the logged data by
exporting it to an USB-pen. The data format is .csv, thus allowing editing in Excel or
similar program.

Figure 4-16: Logging Page for Exporting the Logged Data

4.2.5 IP Address Configuration

1. Touch an empty area of the touch screen for few seconds to show the Context Menu.
2. Press "show system settings" in the Context Menu.
3. Navigate to the Network menu.
4. A pop-up dialogue with keyboard will appear. Press and hold the pop-up to move it if
necessary.
5. Select specify an IP address.
6. Change IP address, subnet mask and confirm by pressing the enter button.
NOTE: choose an IP address that is not used by other devices on the network.
7. Exit the context menu to return to the operating screen.

Figure 4-17: System Info Page

Page 26 of 110