Command And Response Table For Sis Commands - Extron electronics USB Extender Plus T User Manual

Command and Response Table for SIS Commands

ASCII Command
Command
(Host to Unit)
Information Requests
Request part number N
Query firmware version
Q
Q
Example:
Query version and build *Q
Peripheral Emulation (Transmitter Only)
NOTE:
These commands can be issued only to the transmitter.
Set peripheral emulation E
View peripheral E
emulation
Resetting
NOTE:
This command must be issued to both the transmitter and the receiver.
Reset E
Response
(Unit to Host)
X@ ]
n.nn
1.01
n.nn.nnnn
X! }
E USBC Usbc E
} X! ]
E USBC
}
ZXXX Zpx
USB Extender Plus T/R • Remote Configuration and Control
Additional Description
Show the extender part number
X@
For :
Transmitter: 60-1471-12
Receiver: 60-1471-13
] Show the firmware version, expressed to
the second decimal place.
] The unit firmware version is 1.01.
] Show firmware version and build number.
X! ] Set peripheral emulation for the
USB Extender Plus T/R to
0 = disabled
1 = enabled
] Reset the extender to factory default
values.
X@
.
X! X!
. For :
14