Table of Contents
Advertisement
Device Settings
The Device Settings screen allows a user to view and edit various device settings for the
device directly connected to the PC running the XTP software. Click the
icon (see figure 25,
Figure 25.
Video panel
The Video panel contains an option to mute the output video.
2
Video Mute — Click the
video.
NOTE: The button turns red when the video output is muted.
Relay Control panel
The Relay Control panel (
Audio panel
The Audio panel contains an option to mute all audio outputs, adjust output volume, or
enable analog audio for displays connected through DVI.
4
Audio Output — Click the
NOTE: The button turns red when the output audio is muted.
Analog Audio — If applicable, move the
adjust the audio volume in percentage or select an amount in the field below the slider
to adjust the audio volume in decibels.
NOTE: 0 dB = 100% volume and -64 dB = 0% volume.
If a display is connected through a DVI connection, click the check box below the
Analog Audio Volume slider to output analog audio.
1
) on the Global Navigation bar to open the Device Settings screen.
Receiver Device Settings Screen
Video Mute
3
) is not applicable to the XTP R HWP 201.
Mute All
XTP R HWP 201 Wallplate Receiver • XTP System Configuration Software
button to mute to black or unmute the output
button to mute or unmute all audio outputs.
Analog Audio Volume
Device Settings
slider up or down to
29
Advertisement
Table of Contents
