Top Menu
The top menu bar contains three menus for configuring software settings.
File menu
The
menu contains options for disconnecting from the receiver and exiting the
File
program. To access the menu, click the
Figure 19.
Disconnect
This option disconnects the connected device from the XTP System Configuration Software.
From the
File
NOTE: If the device is already disconnected, the
device is connected.
Exit
This option disconnects the receiver from the software and closes the application.
From the
File
Tools menu
The
Tools
menu.
Tools
Figure 20.
NOTE: The
available when directly connected to the XTP R HWP 201.
File Menu
menu, select
Disconnect
menu, select
to close the application.
Exit
menu contains an option for updating firmware. To access this menu, click the
Tools Menu
and
Backup and Restore
XTP R HWP 201 Wallplate Receiver • XTP System Configuration Software
menu.
File
. The Connections screen opens.
option is disabled until a
Disconnect
Software Preference
options are not
26