Audio Output Overview; Reset Modes - Extron electronics XTP R HWP 201 User Manual

Audio Output Overview

By default, an XTP transmitter or matrix switcher prioritizes embedded digital audio over
analog audio. See the table below for a list of supported audio formats.
Audio Input Format
LPCM
Multi-channel PCM
Dolby Digital 2/0
Dolby Digital 2/0 Surround
Dolby Digital 5.1
Dolby Digital EX
Dolby Digital Plus
Dolby TrueHD
DTS 2-channel
DTS Digital Surround 5.1
DTS-ES Matrix 6.1
DTS-ES Discrete 6.1
DTS-HD
DTS-HD Master Audio

Reset Modes

Use the recessed Reset button on the front panel of the receiver to restore factory-shipped
firmware. To access the Reset button, the faceplate may need to be removed (see
figure 14,
Mode Activation
Press the recessed Reset button
while applying power to the device.
NOTE: After a mode 1 reset,
update the device with the
latest firmware version. DO
NOT operate the firmware
version that results from this
mode reset.
Available Audio Formats on Output Connectors
B ).
Reset Mode Summary
Result
The device reverts to the factory
default firmware.
NOTE: If you do not want to
update the firmware or if you
perform a mode 1 reset by
mistake, cycle power to the
device to return the firmware
version running prior to the
reset.
HDMI Analog
X X
X
X
X
X
X
X
X
X
X
X
X
X
X
Purpose/Notes
Use mode 1 to roll back
to factory firmware for a
single power cycle if an
incompatibility issue arises.
XTP R HWP 201 Wallplate Receiver • Operation 18