Table of Contents
Advertisement
Introduction
This section contains general information about this guide and the Extron XTP R HWP 201
Wallplate Receiver, and selected device features. Topics in this section include:
•
•
•
About this Guide
This guide contains installation, operation, and control procedures, and reference
information for the XTP R HWP 201 Wallplate Receiver. In this guide, the terms
"XTP R HWP 201" and "receiver" are used interchangeably to refer to all models of the
XTP R HWP 201 Wallplate Receiver.
About the XTP R HWP 201
The Extron XTP R HWP 201 is a Decora
that include wall-mounted displays. The HDMI output connector is oriented upward at a
90° angle, which minimizes stress on the cable and allows for a low-profile flat panel display
installation. The receiver accepts XTP signals from up to 330 feet (100 meters) away over
a single shielded twisted pair cable and outputs video, audio, bidirectional RS-232 and IR,
and Ethernet to the display. It also provides HDMI audio de-embedding with analog stereo
audio output and volume control.
The XTP R HWP 201 can be powered locally or remotely through an Extron Power Injector
or XTP matrix switcher (see
To configure and control the XTP R HWP 201, connect a host device, such as a computer,
through the USB Config port and enter Simple Instruction Set (SIS) commands (see
Configuration and Control
(see
About this Guide
About the XTP R HWP 201
Key Features
Power Connection
on page 20) or use the XTP System Configuration Software
XTP System Configuration Software
-style wallplate receiver, ideal for XTP Systems
®
on page 14).
on page 24).
XTP R HWP 201 Wallplate Receiver • Introduction
SIS
1
Advertisement
Table of Contents
