Safety Instructions Safety Instructions • English Chinese Simplified (简体中文) 警告: 产品上的这个标志意在警告用户该产品机壳内有暴露的危险 WARNING: This symbol, , when used on the product, is intended to alert the user of the presence of uninsulated dangerous voltage 电压, 有触电危险。 within the product’s enclosure that may present a risk of electric shock.
Reference Information ............1 ........15 About this Guide ..........1 Decora Template Dimensions ......15 About the DTP HDMI 230 D Extenders ....1 Twisted Pair Cable Advantages ....... 2 Transmission Distance ........2 Features ............. 2 Installation and Operation ........
Figure 1. Typical Transmitter and Receiver Application A DTP HDMI 230 D system consists of a transmitter (Tx) and a receiver (Rx). The pair can handle a single HDMI digital video signal and a bidirectional RS-232 or IR link. The DTP HDMI 230 D transmitter and receiver are sold separately. Each purchased transmitter is shipped with a single external desktop 12 VDC power supply that accepts 100 to 240 VAC, 50-60 Hz input.
The maximum transmission distance is determined by the resolution of the signal and the twisted pair cable, graphics card, and display used in the system. With CAT 5e, 6, 6a, or 7 UTP or STP cable, the DTP HDMI 230 D transmitters and •...
Installation and service must be performed by experienced personnel. Decora Unit Mounting The DTP HDMI 230 D transmitter and receiver can be installed in a two-gang electrical wall box, or with a mud ring, with a Decora wall plate cover (supplied).
Page 10
flush with edge of box. Cable Clamp - 2 3 D IO Signal Output Extron Cable DTP HDMI 230 D Decora Faceplate Figure 2. Installing the Wall Box and Mounting the Unit DTP HDMI 230 D Transmitter and Receiver • Installation and Operation...
Page 11
Follow steps 6 through 9 of Site preparation and wall box installation above, and Final installation on the next page. Wall Mud Ring Figure 3. Installing the Mud Ring DTP HDMI 230 D Transmitter and Receiver • Installation and Operation...
At the power outlet, reconnect the power supply. This powers up both units. Transmitter Connections The DTP HDMI 230 D transmitter is in an enclosure that can be mounted in UL-listed standard wall boxes with Decora-style face plates. Transmitter Front Panel...
RJ-45 connector on the transmitter (see Connector and Cable Details on page 10 to properly wire the RJ-45 connectors). Do not connect this device to a telecommunications or computer ATTENTION: data network. DTP HDMI 230 D Transmitter and Receiver • Installation and Operation...
The wall-mountable receiver is in an enclosure that can be mounted in UL-listed standard wall boxes with Decora-style face plates. Receiver Rear Panel Figure 7 shows the rear panel of the DTP HDMI 230 D receiver. POWER 0.8 A MAX DTP 230 D Rx Figure 7.
Receiver Front Panel Figure 8 shows the front panel of the DTP HDMI 230 D receiver. OUTPUTS OVER DTP RS-232 AUDIO Tx Rx G Tx Rx Figure 8. DTP HDMI 230 D Receiver Front Panel Connectors HDMI output connector — Connect an HDMI display for the transmitted direct digital image.
The DTP HDMI 230 D Tx/Rx does not work properly with these cables. Supported cables — The DTP HDMI 230 D is compatible with CAT 5e, 6, 6a, and 7 shielded twisted pair (F/UTP, SF/UTP, and S/FTP) and unshielded twisted pair (U/UTP) cable. Cable recommendations —...
NOTE: Do not tin the power supply leads before installing them in the direct insertion connector. Tinned wires are not as secure in the connectors and could be pulled out. DTP HDMI 230 D Transmitter and Receiver • Installation and Operation...
RS-232 and IR Connector Wiring Figure shows how to wire the RS-232 and IR connector for the DTP HDMI 230 D units. Function RS-232 RS-232 Transmit data Receive data Tx Rx G Tx Rx Signal ground Tx Rx G Tx Rx...
If all other devices are not turned on before the video source, the image may not appear. DTP HDMI 230 D Transmitter and Receiver • Installation and Operation...
Ground Loops When installing the DTP HDMI 230 D series products, be sure to avoid scenarios where the ground potential differs greatly between the locations where the DTP transmitter and DTP receiver are installed. Such situations can cause ground loops, which can result in image drops, no image, or damage to the units.
Reference Information This section includes decora template dimensions for installation of the DTP HDMI 230 D transmitters and receivers. Decora Template Dimensions To create a template, use the dimensions shown on figure 14. NOTES: • The drawing is not full size or to scale. DO NOT scale up or print to use as a template.
Page 22
Extron Electronics makes no further warranties either expressed or implied with respect to the product and its quality, performance, merchantability, or fitness for any particular use. In no event will Extron Electronics be liable for direct, indirect, or consequential damages resulting from any defect in this product even if Extron Electronics has been advised of such damage.