Table of Contents
Advertisement
Using the XTP System Configuration Software
The XTP R HWP 201 can be controlled directly from the front panel Config port or remotely
from an XTP matrix switcher.
Connections
The XTP System Configuration Software opens to the Connections screen. This screen
is used to establish communication with an XTP device through USB connection (see
Configuration port
attempting to connect to it.
Figure 18.
1.
2.
3.
on page 11). Ensure the receiver is connected and powered on before
Connections Screen
From the Connections screen in the software, select the
1
figure 18,
).
Select the connected device to be controlled from the displayed list (
Click the
button (
3
Connect
XTP R HWP 201 Wallplate Receiver • XTP System Configuration Software
). The Device Settings screen opens.
radio button (see
USB
2
).
25
Advertisement
Table of Contents
