iPECS LIP-9002 User Manual

Ericsson-LG iPECS LIP-9002
Handset User Guide

LIP-9002 Button Layout

6.

Phone Directory

Speed Dial

Last Number Redial (LNR)

(stores the last 15 dialed numbers)
Voicemail

Accessing your Voicemail

Listening to Voicemail (Options)

LCD Screen:
status, dialing directories, and text
message information.
1.
2.
3.
4.
5.
7.
9. Volume
8. Speaker
Lift the handset
Press the Speed button
Dial the desired System or Station Speed Dial number
Press the Speed button.
Dial *
Use the Volume keys to select from the last 15 numbers dialed
Press HOLD to dial
Select the Voice Mail Flexkey (if configured) or press the Message button. Enter your password:
this is is your extension number followed by your pin number.
If you do not know your pin, contact your system administrator
Once you have accessed your voicemail inbox here are the options available to you:
Dial 1 – New messages (Dial 1 again to Replay Message)
Dial 2 – Next Message
Dial 3 – Delete Message (Confirm with #)
Dial 4 – Forward message to someone else
Dial 5 – Call back the person who left the message
Dial 6 – To skip the message
Dial 8 – Record/ re-record message
Hang up when finished.
Phone interface for Button Guide
}
10. Flex Keys
Your Communications Solution
1. Transfer: transfer the current active call
or access the PGM menu while the phone
is in idle state.
Speed: assign or use assigned speed
2.
numbers.
3. Message: access your voicemail box.
4. Headset: if a headset is plugged in this
button allows you to toggle between the
headset and handset.
5. Hold: place a call on hold – the caller will
receive on-hold music.
6. Mute: mute the call so that the caller
cannot hear your voice.
7. DND (Do-Not-Disturb): blocks incoming
calls. You can also activate Do-Not-
Disturb while the phone is ringing - this
terminates the call and the caller will get a
fast busy tone.
8. Speakerphone: toggle the speakerphone
On and Off during a call. The button will
automatically illuminate when the phone is
in menu mode.
9. Volume control: adjust the Ring,
Headset, Handset, and Speaker volume.
Flexkeys: a line or feature can be
10.
assigned to these buttons.