Chapter 6. Send & Retrieve Messages; Responding To A Station Message Waiting Indication; Getting Voice Mail Messages - iPECS LIP-9000 Series User Manual

Chapter 6.
6.1 Responding to a Station Message Waiting
Indication
Another station can leave a Station Message Waiting indication (MWI) to
request a callback when you do not answer or your phone is in the DND
mode. If programmed, a flashing MSG LED on the iPECS Phone indicates
when there is a Message Waiting. As a further notification, you may receive
a periodic Message Wait Reminder Tone. You may review and delete
messages as well as respond with a callback.
To review your Station messages:
 Press the MSG button, the LCD shows the Message Summary display,
MWI(05) VMS(002) SMS(02)
ENTER (MWI:1, VMS:2, SMS:3)
 Dial 1 to view message waits from other stations,
 Press the navigation up/down button to scroll through the messages.
To return a call from the list of ICM MWIs:
 Press the navigation up/down buttons to scroll through the messages,
 Press the SEND Softkey or OK button to select and place the return call.

6.2 Getting Voice Mail Messages

When callers are sent to your Voice Mailbox, they can leave a voice
message, in the VPCM or an external Voice Mail system.
The Voice Mail system allows access to and management of received voice
messages. While in your Mailbox, you may modify your password and
Mailbox greeting. In addition, you can remotely control Call Forward for your
station from the VPCM. You will require a valid Authorization code (station
number and password) for your Mailbox to access the Voice messages.
38
Send & Retrieve Messages
LIP-9000 Series User Guide - CM - Issue 1.1