Table of Contents
Advertisement
General Precautions
Y
Prior to using the Workstation, carefully read the Operating Precautions in the Directions for Use (DFU) .
V
This Workstation contains static sensitive components . Observe strict precautions for the protection of static sensitive
components when attempting to repair and service the Workstation .
An explosion hazard exists if the equipment is used in the presence of flammable anaesthetics . Exercise care to locate
the equipment away from any such hazardous sources .
A
Dangerous Voltage . An electrical shock hazard exists if the Workstation casing is opened or removed . Refer all servicing
to qualified service personnel .
If the equipment is dropped, subjected to excessive moisture or spillage, humidity or high temperature, or otherwise
suspected to have been damaged, remove it from service for inspection by qualified service personnel .
To isolate the Gateway from mains supply remove the mains connector from the source socket . The Gateway should
A
be positioned to allow access for disconnecting the mains connector .
Refer all servicing to qualified service personnel only . Circuit board repairs are not recommended - replacements are available .
1000SM00015 Issue 8
Alaris® Gateway Workstation
6/72
General Information
Advertisement
Table of Contents
